CAN sniffer lite is a simplified and reduced version of the CAN sniffer with the fixation of wires into the notches and the use of cable ties. Functionally, the CAN sniffer is the same as the classic version. Smaller components, PCB, box made by 3D printing allowed to reduce the price of this contactless reader. However, the method of this assembly requires that the sensing plates are sufficiently distant from the other data wires in the vehicle. With the classic CAN sniffer, this safe distance was defined by a plastic part for fixing the wires.
Correct fixation of CAN wires to the CAN sniffer sensing surfaces.
Incorrect installation, the twisted wire does not fit into the grooves on the edges of the PCB.
Fixing the wire in the grooves with ties if the wires are twisted with a large pitch.